Sony MVS-8000X User Manual page 308

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

Rotating the wipe pattern (Rotation)

You can rotate the pattern. There are three rotation modes, as follows.

This carries out a wipe with the pattern in a fixed angle.

The parameter Angle determines the angle of pattern rotation.

A value of –100.00 of the parameter Angle corresponds to one whole turn

counterclockwise; a value of +100.00 corresponds to one whole turn

With a value of 0.00 there is no rotation.

Basic Procedure for Wipe Settings

Table 2: Buttons assigned to functions

Toggle Position on or off.

Fix the operating direction.

Return the pattern position to the center of the screen.

Press the [MAIN] button or [SUB] button, turning it on.

Press the [POS] button, turning Position on.

Move the trackball or joystick, to set the wipe position. By pressing the [X]

button, turning it on, you can restrict movement to the horizontal direction,

and by pressing the [Y] button, turning it on, you can restrict movement to

the vertical direction.