Sony MVS-8000X User Manual page 1240

5
6
7
Making detailed settings for a disk recorder (video disk
communications protocol)
1
2
3
1240
Serial Port Settings (Serial Port Assign Menu)
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Item No Item selection
a) 1. Maximum Open Delay: maximum time required to open a file
2. Maximum Cueup Delay: maximum time required to cue up a file
3. Play After Cueup Delay: delay time from the cued-up state to begin playback
4. Play After Open Next Delay: delay time from the Open Next state to begin playback
Turn the knob to set the disk recorder response speed.
Knob Parameter Adjustment
2 Setting Response speed setting
Press [Set].
This confirms the setting.
Repeat steps 4 to 6 as required to make the settings for other items.
In the <DCU Select> group of the DCU >Serial Port Assign menu, select
the target for the setting (DCU1 or DCU2).
Using any of the following methods, select the serial port connected to the
disk recorder for which you want to make settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Port No Serial port
a) The range of setting values depends on the DCU port setting. (When the MKS-2700 is
connected, select 2 for the slot and a value in the range 1 to 6 for the port.)
Press [Port Setting].
When "DDR VDCP" is selected as the protocol, the DCU >Serial Port
Assign >DDR VDCP Setting menu appears.
Setting values
a)
1 to 4
Setting values
0 to 255
Setting values
a)
1 and upwards