Sony MVS-8000X User Manual page 789

2
Press the button corresponding to the region you want to select, turning it
on.
You can also press more than one button.
[M/E 1], [M/E 2], [M/E 3], [M/E 4], [P/P]: These select the
corresponding M/E-1, M/E-2, M/E-3, M/E-4, and PGM/PST regions.
Notes
To select M/E 4, it is necessary to assign M/E 4 to a button.
For details of the assignment, see "Assigning a Region to the Region
Selection Buttons in the Numeric Keypad Control Block or Multifunction
Flexi Pad Control Block" in Chapter 19 (Volume 3).
[USER 1] to [USER 8]: These select the User regions.
[DME 1] to [DME 8]: These select the DME channels.
[DEV 1] to [DEV 12]: These select the regions Device 1 to Device 12,
respectively.
[P-BUS]: This selects P-Bus.
[GPI]: This selects GPI.
[MCRO]: This selects Macro.
[ALL]: This selects all valid regions.
[MASTR]: This selects the master timeline (see "Creating and Saving a
Master Timeline Using the Buttons in the Numeric Keypad Control
Block" (page 830)).
Notes
The regions that can be selected simultaneously are those assigned to the
region selection buttons in the numeric keypad control block. (See
"Assigning a Region to a Region Selection Button in the Numeric Keypad
Control Block or Multifunction Flexi Pad Control Block" in Chapter 19
(Volume 3).)
It is not possible to select [MASTR] and other regions simultaneously. If
selected simultaneously, the master timeline takes precedence.
The first button pressed lights green as the reference region, and any
subsequently pressed buttons light amber.
Pressing one of the amber-lit buttons, while holding down [EFF], turns the
button green to indicate its corresponding region as the new reference
region.
For details of the precedence order for becoming the reference region, see
"Reference region" (page 767).
The display shows the name of the reference region, and the number of the
last register recalled for this region.
789
Recalling a Register