Sony MVS-8000X User Manual page 682

4
5
Erasing the afterimages that remain in memory whenever a
keyframe is passed
Press [Decay Eraser], turning it on.
When the effect passes a keyframe, the afterimage is erased before writing a
new afterimage.
Selecting the freeze timing
In the <Decay Freeze Timing> group, select the timing for motion decay
freezing.
Frame: freeze in frame units.
Field: freeze in field units.
Notes
The freeze timing setting is not required when the following signal formats are
being used.
Applying stardust to the afterimage portion
The afterimage portion becomes stardust, and gradually disappears.
1
2
682
DME Special Effect Operations
Knob Parameter Adjustment
1 Video Decay Degree of blurring of the video
signal
a) At the setting 0.00, there is no afterimage. At a setting of 100.00, the afterimage does not
decay.
In the <Decay Mix Mode> group, select the way in which the video signal
is blurred.
Soft: mix the live image and the afterimage.
Hard: show the lighter of the live image and afterimage.
To erase the afterimage, press [Decay Eraser], turning it on.
Signal formats: 1080P/50, 1080P/59.94, 1080PsF/23.976, 1080PsF/24,
1080PsF/25, 1080PsF/29.97, 720P/50, 720P/59.94
Press the [DUST] button, turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Decay Dust Amount of the afterimage
disappearing as stardust
Setting values
0.00 to 100.00
Setting values
0.00 to 100.00
a)
a)