Sony MVS-8000X User Manual page 1226

4
5
Selectable actions for various trigger types
• When the trigger type is other than "Level"
• When the trigger type is only "Rising Edge" or "Falling Edge"
1226
GPI Input Setting (GPI Input Assign Menu)
The action set in the following step 4 is executed for the switcher and DME
controlled by the selected control panel.
Using any of the following methods, select the action you want to set.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter
2 Action
4 Aux Bus No
5 Reg No
5 Src No
a) As for the setting values, see "Selectable actions for various trigger types" (page 1226)
b) When knob 2 selection is "Aux ? O'ride Src ??"
c) When knob 2 selection is "Key Snapshot"
d) When knob 2 selection is "Snapshot" or "Shotbox"
e) When knob 2 selection is "Macro"
f) When knob 2 selection is "Effect"
g) For primary inputs: 1 to 144
For premium inputs: 145 to 164 ((PREM1) to (PREM20) indicated after the number)
For format converter dedicated inputs: 165 to 180 ((FC1) to (FC16) indicated after the
number)
To confirm the setting in step 4, press [Action Set].
This confirms the setting, which appears in the status area.
(In M/E-x, the x is the M/E bank number (1 to 4); in DSKx the x is the DSK
number (1 to 8); in Keyx the x is the key number (1 to 8)).
M/E-x Cut, M/E-x Auto Trans, P/P Cut, PP Auto Trans, M/E-x Keyx Cut,
M/E-x Keyx Auto Trans, P/P DSKx Cut, P/P DSKx Auto Trans, FTB Auto
Trans, FTB Cut, Master SS ? Recall, SS ? Recall, M/E-x Keyx SS ? Recall,
P/P DSKx SS ? Recall, Master Effect ? Recall, Effect ? Recall, Effect ?
Recall & Run, KF Run, KF Stop, KF Rewind, FM Src1 Field Freeze, FM
Src1 Frame Freeze, FM Src1 Freeze Off, FM Src2 Field Freeze, FM Src2
Frame Freeze, FM Src2 Freeze Off, FM Src1 Clip Record, FM Src1 Clip
Stop, FM Src2 Clip Record, FM Src2 Clip Stop, FM1 to FM8 Clip Cueup,
FM1 to FM8 Clip Play, FM1 to FM8 Clip Stop, Shotbox ? Recall, Macro
Take, Macro ? Recall, No Action
Adjustment
Action selection
AUX bus selection
Register number
Source signal selection
Setting values
a)
1 and upwards
b)
1 to 48
c)
1 to 4
d)
1 to 99
e)
1 to 250
f)
1 to 399
b)
1 and upwards