Displaying A List Of Effect Registers For Editing - Sony MVS-8000X User Manual

Notes
The following names cannot be used.
CON, PRN, AUX, CLOCK$, NUL, COM0, COM1, COM2, COM3,
COM4, COM5, COM6, COM7, COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9

Displaying a List of Effect Registers for Editing

You can display a list of effect registers including status information (whether
data is present and so on), then carry out lock, copy, delete, and rename
operations.
Displaying the list of effect registers with status information
Press the menu title button at the top left of the Effect menu.
The Effect >Status menu appears. The status area shows a list of effect registers
(1 to 99).
Register name displays
For the same number, the register name for the M/E-1 region takes precedence.
If there is no data for the M/E-1 region, then the register name appears in the
sequence M/E-2 >M/E-3 >M/E-4 >P/P >User1 to User8 >DME ch1 to DME
ch8 >Device1 to Device12 >P-Bus >GPI >Macro.
Indication colors
Each register has a color-coded border, indicating its status.
Selected register: pale blue border
Register containing data: shown amber within the border. If, however, there
are one or more locked regions, the display is in red.
Write-protecting the contents of the register (lock function)
(This applies to all regions.)
In the Effect >Status menu, use the following procedure.
1
Using any of the following methods, select the register you want to lock.
• Press directly on the corresponding register indication in the status area.
• Turn the knob.
Knob
1
Parameter Adjustment
Register Register selection
Setting values
1 to 99
Register Operations in the Menus
843