Sony MVS-8000X User Manual page 804

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

Modifying more than one keyframe simultaneously

You can modify a number of keyframes simultaneously. There are three

different cases for this operation.

• Modifying from the edit point to a particular keyframe

• Modifying all keyframes in the effect

• Modifying the keyframes in a specified range

The different procedures for these cases are now described.

To modify from the edit point to a particular keyframe

To modify all keyframes in the effect

Creating and Editing Keyframes

Using image transformations or adding special effects, modify the

Press the [MOD] button.

This modifies the keyframe.

Press the [EDIT ENBL] button, turning it on.

Stop the effect at the first keyframe of the range to be modified.

Carry out the necessary modifications.

Press the [FROM TO] button, turning it on.

The display in the numeric keypad control block shows the current

keyframe number, followed by "TO."

Enter the number of the last keyframe to be modified from the numeric

keypad control block and press the [ENTER] button to confirm.

Press the [MOD] button. Alternatively, hold down the [SHIFT] button and

press the [MOD] button.

For the difference in the result, see "Differences in the changes when a

number of keyframes are modified" (page 806).

This makes the modification simultaneously to all keyframes from the edit

point to the specified keyframe.

Press the [EDIT ENBL] button, turning it on.

Carry out the necessary modifications on any keyframe.