Sony MVS-8000X User Manual page 445

1
In the <M/E-1 Transition Rate> group of the Misc >Transition menu, press
[Transition].
2
Turn the knob to set the number of frames.
Knob
1
Notes
When a clip transition is selected as the transition type, it is not possible to
change the transition rate in this menu.
To set the independent key transition rate
By way of example, the following is the procedure for settings of keys 1 to 4
in the M/E-1 block.
1
Press in the list in the status area of the Misc >Transition menu, to select
M/E-1.
2
In the <Transition Rate> group, press [Key K1-K4].
To insert (on) or remove (off) keys individually, press [Key(On) K1-K4]
or [Key(Off) K1-K4].
3
Turn the knobs to set the number of frames.
Knob
1
2
3
4
To set the fade-to-black transition rate in the Transition menu
1
In the Misc >Transition menu, press [FTB].
2
Turn the knob to set the number of frames.
Knob
1
Parameter Adjustment
Transition Rate Transition rate
Parameter Adjustment
Key1 Trans Rate Key 1 transition rate
Key2 Trans Rate Key 2 transition rate
Key3 Trans Rate Key 3 transition rate
Key4 Trans Rate Key 4 transition rate
Parameter Adjustment
Transition Rate Transition rate
Setting values
0 to 999 (frames)
Setting values
0 to 999 (frames)
0 to 999 (frames)
0 to 999 (frames)
0 to 999 (frames)
Setting values
0 to 999 (frames)
Misc Menu Operations
445