Macro Operations in the Multifunction Flexi
Pad Control Block
This section describes macro operations carried out in the Multifunction Flexi
Pad control block.
Use the following buttons.
[MCRO] button
Recalling a Macro Register and Executing a Macro
1
2
934
Macro Operations in the Multifunction Flexi Pad Control Block
Numeric keypad buttons
Press the [MCRO] mode selection button, turning it on.
This switches the Multifunction Flexi Pad control block to macro
operation mode.
Enter the register number with the numeric keypad buttons, and press the
[ENTR] button to recall the register.
[DRCT MODE] button