Sony MVS-8000X User Manual page 279

Knob
1
2
3
4
5
a) Shared with the drop shadow "Soft" value.
4
To add an outline, press [Out Line], turning it on.
5
To adjust the border color, press [Border Color].
6
Set the color parameters.
For details, see "To apply color to a border" (page 276).
Applying a drop shadow
1
In the M/E-1 >Key1 >Processed Key >Enhanced Effect menu, press [Dual
Rszr Effect], turning it on.
2
Press [Drop Shadow], turning it on.
3
Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• SD format
Knob
1
2
3
4
5
a) Shared with the wide key border "Soft" value.
Parameter Adjustment
H Simultaneously adjust border
width of left and right edges
V Simultaneously adjust border
width of upper and lower edges
All Simultaneously adjust border
width of all four edges
Softness of border
a)
Soft
Density Density of border
Parameter Adjustment
H Horizontal position of shadow
V Vertical position of shadow
Size Shadow size
a) Softness of shadow
Soft
Density Density of shadow
Setting values
0.00 to +100.00
0.00 to +100.00
Value of H shown
0.00 to +100.00
0.00 to +100.00
Setting values
–8.00 to +8.00
–6.00 to +6.00 (4:3)
–4.50 to +4.50 (16:9)
0.00 to 2.00
0.00 to 100.00
0.00 to 100.00
279
Resizer