Sony MVS-8000X User Manual page 460

4
To return the parameters to their default settings
In the <Primary CCR> group, press [Unity].
Masking a part of the primary color correction
Here the procedure for mask 1 operation is described by way of example. You
can carry out mask 2 operation in a similar way.
1
2
3
460
Color Corrector Functions
Depending on the selection in step 3, adjust the following parameters.
• When Black or Gamma is selected
Knob Parameter Adjustment
1 Red Red signal adjustment
2 Green Green signal adjustment
3 Blue Blue signal adjustment
4 All Simultaneous RGB adjustment
• When White is selected
Knob Parameter Adjustment
1 Red Red signal adjustment
2 Green Green signal adjustment
3 Blue Blue signal adjustment
4 All Simultaneous RGB adjustment
• When Knee is selected
Knob Parameter Adjustment
1 Red Red signal adjustment
2 Green Green signal gain
3 Blue Blue signal gain
4 All Simultaneous RGB adjustment
In the Primary CCR menu, press [Mask1].
In the < Primary/Secondary Mask > group, press [Mask1], turning it on.
Notes
When [Mask 2] is selected in the Secondary CCR menu, linked to this
setting it automatically changes from [Mask 2] to [Mask 1].
Press [Mask1 Adjust].
Setting values
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
Red value is shown
Setting values
0.00 to 200.00
0.00 to 200.00
0.00 to 200.00
Red value is shown
Setting values
20.00 to 75.00
20.00 to 75.00
20.00 to 75.00
Red value is shown