Sony MVS-8000X User Manual page 640

1
2
640
DME Special Effect Operations
In the <Mode> group, select the wave modulation mode.
H&V: Modulate vertically and horizontally without changing the size of
the image. This mode allows waves to be created in both the vertical
and horizontal directions at the same time.
Size: Create waves by reducing and expanding the image. This mode
allows waves to be created in one direction only.
Size not modulated.
1 and 2 are same size.
Before modulation
Create waves by reducing 1
and expanding 2 the image.
Set the following parameters, according to the selected mode.
• When H&V is selected
Knob Parameter Adjustment
1 Amp H Amplitude of waves in horizontal
direction
2 Freq H Frequency of waves in horizontal
direction
3 a) Horizontal direction in which to
Offset H
offset wave phase and amount of
movement
4 b) Horizontal direction and speed of
Speed H
waves
5 Slant Slant of waves
Parameter group [1/2]
Setting values
0.00 to 100.00
0.00 to 100.00
c)
–16.00 to +16.00
d)
–64.00 to +64.00
–100.00 to +100.00
–8.000 to +8.000