Graphics Display Operation - Sony MVS-8000X User Manual

Multi-format production switcher processor with ccp-8000 series center control panel volume 1
Hide thumbs Also See for MVS-8000X:
Table of Contents

Advertisement

To enter difference values
You can enter difference values by pressing the [+/–] button, entering the
difference from the current value, and pressing the [TRIM] button to confirm.
The [+/–] button toggles between "+" (plus) and "–" (minus) each time it is
pressed.
Resetting three-dimensional parameter values
Pressing the [CTR] button in the device control block sets the current three-
dimensional parameter values to the closest detent points (page 559).
To reset three-dimensional parameter values to the defaults (page 559) for the
current transformation operation mode, press the [CTR] button twice in rapid
succession.
Clearing the working buffer
The working buffer is memory that holds the instantaneous state of an effect.
To clear (initialize) only the three-dimensional transform parameters in the
working buffer, press the [CLR WORK BUFR] button in the device control
block.
To clear all of the parameters in the working buffer and initialize the DME
system, press the [CLR WORK BUFR] button twice in rapid succession. It is
necessary to do this for both the local coordinate space and global coordinate
space.
As the initial DME state, you can specify whether to use the factory default
settings or user settings in the Setup menu. (See "Selecting the State After
Powering On (Start Up Menu)" in Chapter 18 (Volume 3).)

Graphics Display Operation

Use the DME menu to make graphics display settings. You can make separate
settings for separate channels. To select a target DME channel, use the device
control block. (For the types of graphics displayed, see "Graphics Display"
(page 564).)
Displaying graphics
1
In the menu control block, select the top menu selection button [DME].
The DME menu appears.
2
Select VF6 'Input/Output' and HF4 'Graphic.'
The Graphic menu appears.
Three-Dimensional Transformation Operations
575

Advertisement

Table of Contents
loading

Table of Contents