Restrictions On Using Multi Program 2 Mode - Sony MVS-8000X User Manual

Item
Snapshots
Control from an editor
Operation setting for
switcher GPI inputs and
outputs
a) Keys 2 to 8 are common to main and sub.
Notes
• Allow a transition to complete before carrying out main and sub delegation
switching.
• The sub background A bus (utility 2 bus) is shared with wipe edge border fill.
Making a change to one affects the other.
• Even if the wipe border width is set to the same numeric value for main and
sub, the same image is not obtained.

Restrictions on Using Multi Program 2 Mode

• The following functions are not available for sub:
– Data copy and swap
– Default recall (except for parametric recall)
– [AUTO] button function (see page 103)
• Re-entry is limited to five levels. Re-entry is not possible for main and sub
of the same M/E.
However, this restriction can be removed. For details, see "Enabling re-
entry between the main and sub sides of the same M/E bank" (page 489).
• In the following cases, a transition using the fader lever may not be
performed correctly:
– When the main and sub bus toggle modes are set differently
– For a pattern mix, preset color mix, and so on
• For an Internal bus link, GPI link, or External bus link, the "Utility 2" bus
cannot be selected.
• Screen aspect, show key, and [MCRO ATTCH ENBL] button settings are
common to main and sub.
• If a snapshot is recalled simultaneously for main and sub, or a keyframe is
executed simultaneously for main and sub, then for the following common
to main and sub the main settings are reflected.
– Key
– M/E Config
– DME external video bus and utility 1 bus
492
Multi Program 2
Main
Cross-point Utility 2 cannot be set
hold
Same as standard mode
Same as standard mode
Sub
Utility 3 is added. BKGD
A/B and Key1 cannot be
set.
Cannot be used
Cannot be used