Assigning Functions to Key Control Block Buttons
Select one of the four key control blocks installed in the main base and
extension, then assign functions to the 30 buttons.
1
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
2
Press [Key Control Module].
The Key Control Module menu appears.
3
Press one of [1st], [2nd], [3rd], and [4th], to select the key control block.
4
Press [Button Assign].
The assignment status of the control block you selected in step 3 above
appears.
5
Press the button to which you want to assign a function, displaying it in
reverse video.
6
Using any of the following methods, select the function you want to assign
from the Button Assign list.
• Press directly on the list.
Overall Control Panel Settings (Config Menu)
1101