Basic Procedure For Wipe Settings; Wipe Settings Menu; Wipe Pattern Selection - Sony MVS-8000X User Manual

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

Basic Procedure for Wipe Settings

You carry out wipe setting operations principally using the Wipe menu for each

of the M/E-1 to M/E-3 and PGM/PST banks.

This section describes the basic procedures for wipe settings, taking the M/E-

1 >Wipe menu as an example.

For details of independent key transition wipe settings, see "Wipe Settings for

Independent Key Transitions" (page 319).

Accessing the wipe settings menu

To access the M/E-1 >Wipe menu, use either of the following operations.

• In the menu control block, select the top menu selection button [M/E 1], and

press VF5 'Wipe.'

To select [M/E-4], a previous assignment in the Setup menu is required.

• In the transition control block of the M/E-1 bank, press the transition type

selection button [WIPE] twice in rapid succession.

Any of the above operations displays the M/E-1 >Wipe menu.

Selecting a wipe pattern by a menu operation

In the M/E-1 >Wipe menu, select HF1 'Main Pattern.'

The Main Pattern menu appears.

Select the wipe pattern group with the pattern group selection button.

Standard: standard wipes

Enhanced: enhanced wipes

Rotary: rotary wipes

Mosaic1 to Mosaic3: mosaic wipes

Basic Procedure for Wipe Settings