Sony MVS-8000X User Manual page 276

2
3
4
To apply color to a border
1
2
276
Resizer
This enables the resizer function.
Press [Border/Crop].
The Border/Crop menu appears.
Press [Border], turning it on.
This enables the adjustment of crop.
Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• SD format
Knob Parameter Adjustment Setting
1 H Simultaneously adjust width of left
and right borders
2 V Simultaneously adjust width of top
and bottom borders
3 All Simultaneously adjust width of all
four borders
5 Density Density of the borders
• HD format
Knob Parameter Adjustment Setting
1 H Simultaneously adjust width of left
and right borders
2 V Simultaneously adjust width of top
and bottom borders
3 All Simultaneously adjust width of all
four borders
5 Density Density of the borders
In the <Border Mode> group of the Border/Crop menu, press [Flat Color].
Adjust the following parameters.
Knob Parameter Adjustment Setting
1 Luminance Luminance
2 Saturation Saturation
Values
0.00 to 4.00
0.00 to 3.00 (4:3)
0.00 to 2.25 (16:9)
Value of H shown
0.00 to 100.00
Values
0.00 to 12.00 (4:3)
0.00 to 16.00 (16:9)
0.00 to 9.00
Value of H shown
0.00 to 100.00
Values
0.00 to 100.00
0.00 to 100.00