Sony MVS-8000X User Manual page 790

3
4
5
To undo the recall of a register
Immediately after recalling the register, press the [UNDO] button to undo the
operation.
Notes
After recalling the master timeline, you cannot undo the recall.
Recalling the master timeline in the Flexi Pad control block
Whichever block you recall the master timeline from, the region set when it
was saved is recalled.
790
Recalling a Register
Enter the number of the register you want to recall, using the numeric
keypad.
To find an empty register, instead of entering a number, press the [.]
(period) button. To search for an empty register common to all currently
selectable regions, press the [.] button again.
To search for an empty register in the 100 range, press [1], [0], [0], [.]
(period) in this order. Similarly, to search for an empty register in the 200
range, press [2], [0], [0], [.] (period), and to search for an empty register in
the 300 range, press [3], [0], [0], [.] (period).
The register number appears in the display. If the number is followed by a
letter 'e' or 'E,' this indicates the following.
e: The selected register is empty for the regions selected in step 2.
E: The selected register is empty for all currently selectable regions.
To apply a temporary attribute (effect dissolve), press the [+/–/EFF DISS]
button.
Notes
It is not possible to apply temporary attributes to the master timeline.
Press the [ENTER] button.
This recalls the specified register.
When the master timeline is recalled, the region selection buttons light
according to the saved region information.