Sony MVS-8000X User Manual page 664

To apply the Explosion effect
With the Explosion menu displayed, use the following procedure.
1
2
To make the fragments stardust
1
2
To set the explosion center point
1
664
DME Special Effect Operations
In the <Mode> group, select the explosion pattern.
• Circle
• Rectangle
• Star
• Heart
• Ellipse
Set the following parameters.
• When Circle was selected in step 1
Knob Parameter Adjustment
1 Transition Degree of transition
2 Curve Degree to which image periphery
expands
3 Spiral Degree of curvature of transition
path
• When Rectangle, Star, Heart, or Ellipse was selected in step 1
Knob Parameter Adjustment
1 Transition Degree of transition
2 Curve Degree to which image periphery
expands
3 Aspect Aspect ratio of waveform
4 Angle Slant of waveform
Press [Pixel], turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Density Degree to which image
disappears
2 Random Degree of randomness in flying
out fragment positions
Press [Position], turning it on.
Setting values
0.00 to 100.00
0.00 to 100.00
–100.00 to +100.00
Setting values
0.00 to 100.00
0.00 to 100.00
–100.00 to +100.00
–8.000 to +8.000
Setting values
0.00 to 100.00
0.00 to 100.00