Sony MVS-8000X User Manual page 1064

4
5
6
7
8
(In case it becomes necessary to cancel the license registration, you can use the
following procedure.)
To cancel the license registration
1
2
3
4
5
1064
Installation and Device Setup (Install/Unit Config Menu)
Press [License Management].
The License Management menu appears.
Press [Activate License].
A keyboard window appears.
Enter the 16-character install key you have been given, and press [Enter].
A license registration completed message appears.
Press [OK].
The status area Condition box shows "Active."
Using either of the following methods, restart the device.
• In the System >Initialize menu, with only the device for which you
registered the license being selected, press [Reset] in the <Initialize>
group and then press [Execute].
• Power off and on again.
After restarting, the licensed software is now available for use.
In the System >Install/Unit Config menu, use either of the following
methods to select the device for which you want to cancel the license
registration.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
Press [License].
The License menu appears.
Press directly on the name of the software for which you want to cancel the
license registration (the Condition box shows "Active").
Press [License Management].
The License Management menu appears.
Press [Deactivate License].