Notes
• This selection is possible when the BZS-8050 license is valid (see page
1062).
• A port to which Mixer ESAM-II is assigned is automatically set to Enbl, and
you cannot change this setting.
Sharing Disk Recorder/Extended VTR File Lists
To share files between devices connected to the same disk recorder/Extended
VTR, use the following procedure.
Notes
The following operation can only be carried out for the ports to which a disk
recorder or Extended VTR is assigned.
1
In the Panel >Device Interface >DCU Serial Port/MPE Assign menu,
select the target disk recorder/Extended VTR.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
a) The range of the setting value depends on the DCU port settings.
2
Turn the knob to select the device selection button (DEV1 to DEV12) for
sharing the file list.
Knob
2
3
Press [Same File List Set].
This is reflected in the file list in the status area.
4
Repeat steps 1 to 3 as required to select other devices for sharing the file
list.
Parameter
Adjustment
No
Serial port selection
Parameter
Adjustment
File List
Device selection button for
sharing the file list
Interfacing With External Devices (Device Interface Menu)
Setting values
a)
1 and upwards
Setting values
1 to 12
1149