Sony MVS-8000X User Manual page 465

The Luminance Process menu appears.
2
In the <Luminance Process> group, press [Luminance Process], turning it
on.
3
In the <Mode> group, specify the adjustment mode.
Tint: add a specified color to the original video signal.
Color Modify: adjust the original video signal.
Y Modify: adjust the output levels of the input luminance signal.
When tint mode or color modify mode is selected, skip to step 4.
When Y modify mode is selected, adjust the following parameters.
Knob Parameter
1 White
2 Black
3 Y Lift
4 Y Dark
4
In the <Bound> group, make the settings for the three regions (Dark,
Middle, and Bright).
• [Level] parameters: set the boundaries of the three regions.
Knob Parameter
1 Over B Level Luminance level of the Over
2 Mid B Level
3 Dark Mid
Level
4 Under D
Level
• [Soft] parameters: set the degree of boundary softness of the three
regions.
Knob Parameter
1 Over B Soft
2 Mid B Soft
3 Dark Mid
Soft
Adjustment
White balance adjustment
Black balance adjustment
Curvature of curve
Position of maximum point of
curve
Adjustment
Bright point
Luminance level of the Bright/
Middle point
Luminance level of the Middle/
Dark point
Luminance level of the Under
Dark point
Adjustment
Degree of softness at Over Bright
point
Degree of softness at Bright/
Middle point
Degree of softness at Middle/Dark
point
Setting values
0.00 to 200.00
–100.00 to +100.00
–100.00 to +100.00
–7.31 to +109.59
Setting values
50.00 to 150.00
10.00 to 120.00
–20.00 to +90.00
–50.00 to +50.00
Setting values
15.00 to 70.00
15.00 to 42.50
15.00 to 42.50
Color Corrector Functions
465