Sony MVS-8000X User Manual page 840

1
2
3
4
5
6
840
Register Operations in the Menus
In the Effect menu, press VF2 'Effect 1-99' and HF3 'Copy/Merge.'
• The Copy/Merge menu appears.
• The left side of the status area shows the register number of the copy
source, and the right side shows the register number of the copy
destination.
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window. Selecting multiple
regions is also possible.
To select all regions, press [ALL].
Operation between regions
Operation between regions is possible in the following cases.
• Two of the M/E-1, M/E-2, M/E-3, M/E-4, and P/P regions
• Two of the User1 to 8 regions of the same configuration
• Two of the DME ch1 to 8 (including Global) regions
Press [OK].
The selected region name appears in the upper part of the list.
Using any of the following methods, select the desired registers.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter
1 From Reg
2 To Reg
3 Num
• To select all registers, press [ALL].
To copy without transferring the name, in the <Copy> group, press [W/o
Name], turning it on.
In the <Copy> group, press [Copy].
This carries out the copy.
If, for example, the copy destination register is write-protected or the same
register is specified both as the copy source and destination registers, a
confirmation message appears. Press [OK] to cancel the copy.
Adjustment
Copy source register number
Copy destination register number 1 to 99
Select number of registers
Setting values
1 to 99
1 to 99