Sony MVS-8000X User Manual page 307

• The parameter H Position controls the horizontal position of the pattern.
A negative value moves the pattern to the left, and a positive value moves the
pattern to the right.
• The parameter V Position controls the vertical position of the pattern.
A negative value moves the pattern down, and a positive value moves the
pattern up.
You can set the position independently for the main pattern and sub pattern.
1
In the M/E-1 >Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
2
In the <Position> group, press [Position], turning it on, and set the pattern
position.
Knob Parameter
1 Position H
2 Position V
To return the pattern position to the center of the screen
In the <Position> group, press [Center].
To move the pattern from its current position to the center through
the course of a transition
In the <Position> group, press [Auto Center], turning it on.
To set the wipe position using the trackball or joystick
You can also set the wipe position using the trackball or joystick in the device
control block.
1
In the device control block, press the [M/E1], [M/E2], [M/E3], [M/E4], or
[P/P] button, turning it on.
Notes
The [M/E4] button requires a previous assignment in the Setup menu.
The buttons in the device control block are assigned to the wipe position
setting as follows.
Button name
MAIN
SUB
Adjustment
Horizontal position
Vertical position
Table 1: Buttons and assigned settings
Setting
Wipe position for common transition (main pattern)
Wipe position for common transition (sub pattern)
Setting values
–200.00 to +200.00
–200.00 to +200.00
Basic Procedure for Wipe Settings
307