Inhibiting Utility 2 Bus And Key Operations - Sony MVS-8000X User Manual

This assigns the device or function selected in the list to the button.
To cancel an assignment
Select the button, then press [Clear].
This removes the assignment to that button.
To return all device selection button assignments to the factory
default state
In the Joystick/Trackball Module menu, press [Default].

Inhibiting Utility 2 Bus and Key Operations

You can inhibit operations on the utility 2 bus and keys 1 to 8 of the M/E and
PGM/PST banks by menu operations.
This inhibitions apply for the following control blocks.
• Cross-point control block
• Transition control block
• Independent key transition control block
1) Only when the Key1, 2, Key 3, 4, Key5, 6 or Key7, 8 are assigned by the Compact Key Module
Assign menu.
Notes
In the auxiliary bus control block and other control blocks which are excluded
from M/E and PGM/PST banks, the operations on the utility 2 bus and keys 1
to 8 are not inhibited.
1
In the Panel >Config menu, press [Operation Inhibit].
Operation Inhibit menu appears.
2
Press [M/E Operation Inhibit].
The M/E Operation Inhibit menu appears.
3
In the list in the status area, using any of the following methods, select the
switcher bank for which operations are to be inhibited.
• Press directly on the desired switcher bank in the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
Parameter Adjustment
Bank Switcher bank selection for
inhibiting operations
1)
Setting values
1 and upwards
Overall Control Panel Settings (Config Menu)
1105