Applying barrel or pincushion distortion to the edge of the wipe
pattern (Spring)
As the transition progresses, the edge of the pattern is subjected to barrel or
pincushion distortion.
A negative parameter value produces pincushion distortion, and a positive
value produces barrel distortion.
You can set the spring function independently for the main and sub patterns.
1
2
3
Applying a spiral effect to the wipe pattern (Spiral)
This deforms the pattern spirally.
316
Basic Procedure for Wipe Settings
Spring off
In the M/E-1 >Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
Press [Spring], turning it on.
Set the following parameters.
Knob
Parameter
Adjustment
1
Gain
Degree of barrel distortion
Spiral off
Spring on
Setting values
–100.00 to +100.00
Spiral on