Sony MVS-8000X User Manual page 1117

5
Using the buttons in the <Button Assign> group, assign the selected pair
number to the button number currently selected in table 1.
Set: Delete the signal currently assigned to the selected button number and
make a new assignment.
Insert: Move down one line the signal currently assigned to the selected
button number and following signals, and make a new assignment.
Notes
When a button number upper than 121 is selected, execution of "Insert" is
impossible. The signal assignments to button numbers upper than 121
cannot be changed. When "Insert" is executed for any other number,
moving down of signals ends at number 120, and the signals assigned to
numbers upper than 121 are maintained in their original lines.
To disable a button
In the Panel >Xpt Assign >Table Button Assign menu, select the button you
want to disable, and press [Inhibit].
To delete any currently assigned signal
In the Panel >Xpt Assign >Table Button Assign menu, select the button
corresponding to the signal you want to delete, and press [Delete] in the
<Button Assign> group.
The signal assigned to the button number next to the selected button number
and following signals move up one line.
Notes
When a button number upper than 121 is selected, execution of "Delete" is
impossible. The signal assignments to button numbers upper than 121 cannot
be changed. When a signal assigned to any other button number is deleted,
moving up of signals ends when the signal assigned to number 120 has moved
to number 119, and the signals assigned to numbers upper than 121 are
maintained in their original lines.
Returning the table to its default state
1
In the Panel >Xpt Assign >Main, V/K Pair Assign menu or Panel >Xpt
Assign >Table Button Assign menu, press [Default Recall].
A confirmation message appears, asking whether or not to return to the
default state.
2
To return to the default state, press [Yes], and to cancel the operation, press
[No].
Cross-Point Settings (Xpt Assign Menu)
1117