Sony MVS-8000X User Manual page 642

To stop the waves
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the waveform
Press [Form] and set the following parameters.
• When H&V mode is selected
Knob
1
2
• When Size mode is selected
Knob
1
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
To randomize the modulated waveform
1
2
642
DME Special Effect Operations
Parameter Adjustment
Form H Waveform in horizontal direction
Form V Waveform in vertical direction
Parameter Adjustment
Form H Waveform
Press [Random], turning it on.
Set the following parameters.
• When H&V mode is selected
Knob Parameter Adjustment
1 Random H Degree of randomness in
horizontal waveform modulation
2 Random V Degree of randomness in vertical
waveform modulation
3 Random All Degree of randomness in both
vertical and horizontal directions
• When Size mode is selected
Knob Parameter Adjustment
1 Random H Degree of randomness in
waveform modulation
Setting values
a)
1 to 6
a)
1 to 6
Setting values
a)
1 to 6
Setting values
0.00 to 100.00
0.00 to 100.00
Random H value
shown
Setting values
0.00 to 100.00