Register Operations In The Menus; Effect Attribute Settings - Sony MVS-8000X User Manual

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

Register Operations in the Menus

Using the Effect menu, you can carry out the following effect register

• Attribute setting

• Status display

• Register editing

To display the Effect menu

Press the top menu selection button [EFF] in the menu control block.

The menus for editing registers are divided up by registers. Here the menu for

registers 1 to 99 is described as an example, but you can carry out operations

in the same way on registers 101 to 199, 201 to 299, and 301 to 399, using VF3

Also for registers for P-Bus and Device1 to Device12, carry out similar

operations using VF6 'DEV/PBUS Effect 1-250.'

Applying effect dissolve

To apply the "effect dissolve" attribute to a keyframe effect, use the following

In the Effect menu, press VF2 'Effect 1-99' and HF1 'Attribute.'

The Attribute menu appears.

The status area shows the region names, register numbers and status, and

attribute settings.

Press the region display in the upper part of the list, and in the selection

window select the region. Selecting multiple regions is also possible.

To select all regions, press [ALL].

The selected region name appears in the upper part of the list.

Using any of the following methods, select the register.

• Press directly on the list in the status area.