Copy And Swap Operations; Copy And Swap Menu Operations - Sony MVS-8000X User Manual

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

Copy and Swap Operations

Accessing the Copy/Swap menu

In the menu operation section top menu selection buttons, press the [Copy/

Swap] button, then press VF1 'Copy/Swap.' The Copy/Swap menu appears.

Here a copy/swap operation on wipe data is described by way of example,

using the Copy/Swap >Wipe menu, but the same general procedure applies to

all of the following menus.

• M/E: Copying and swapping M/E data

• Key: Copying and swapping key data

• Wipe: Copying and swapping wipe data

• DME Wipe: Copying and swapping DME wipe data

• Matte: Copying and swapping matte data

• Color: Copying and swapping color data

• DME: Copying and swapping data by DME channels

• Format Converter: Copying format converter data

For details, see "Settings Relating to Signal Inputs (Input Menu)" in

Chapter 21 (Volume 3).

For an overview of the concepts involved, see "Copy and Swap" (page 434).

For details of color corrector copy and swap, see "Copy and Swap

Operations" (page 456).

Copying and swapping wipe data

As an example, to copy or swap wipe data, use the following procedure.

Copy and Swap Operations

In the Copy/Swap menu, select HF3 'Wipe.'

The Copy/Swap >Wipe menu appears.

The status area shows lists for the copy/swap source on the left, and the

copy/swap destination on the right.

In the <Data Select> group, select either of the following.

Wipe: The operation applies to wipes in the transition control block.

Key Wipe: The operation applies to wipes in the independent key

transition control block.