Independent Key Transitions With A Simple Transition Module - Sony MVS-8000X User Manual

• The necessary settings have been made in a Setup menu to enable the split
fader (See "Settings Relating to Video Switching (Transition Menu)" in
Chapter 20 (Volume 3).)
• A background is selected for the next transition.
• For the transition type, [MIX] or [NAM] is selected.
Split fader operation
The two halves of the split fader lever correspond to the buses as follows.
Right fader lever: Background A bus
Left fader lever: Background B bus
The relationship between the positions of the two fader levers and the image
output in a mix is as follows.
Left lever position Right lever
Top
Bottom
Top
Bottom
Center
• When the transition type is NAM, the outputs of the A bus and B bus in the
above table are the outputs subjected to NAM.
• The transition indicators always show the progress of the background A bus.
• The operation of the left lever and that of the right lever can be swapped. (See
"Operation Settings (Operation Menu)" in Chapter 19 (Volume 3).)
Independent Key Transitions With a Simple Transition
Module
You carry out independent key transition operations using the independent key
transition control block (simple type). This controls only keys 3 and 4.
However, each key button can be assigned to any key in setup (see "Overall
Control Panel Settings (Config Menu)" in Chapter 19 (Volume 3)).
206
Simple Transition
A bus output
position
Top 100%
Top 100%
Bottom 0%
Bottom 0%
Center 50%
B bus output
0%
100%
0%
100%
50%