Sony MVS-8000X User Manual page 255

• "Key drop ON" mode
Knob
1
2
4
a) In the "4H mode" and when [Fine Key] (page 235) is on, the setting value range is 0 to 4.
To adjust the edge fill color
When [DROP BDR] or [SHDW] is selected, the [MORE] button lights amber.
Pressing the [MORE] button to turn it green then allows you to adjust the edge
fill color parameters with the knobs.
Knob
1
2
3
4
Setting the outline parameters
When the [OUTLINE] button is lit green, the parameter settings depend on the
key type and whether the separate edge function is active. To activate the
separate edge function, press [Separate Edge], setting it on, in the Edge menu
for the key.
• Separate edge off
Knob
1
4
a) In the "4H mode" and when [Fine Key] (page 235) is on, the setting value range is 0 to 4.
b) When a wipe pattern key or key wipe pattern key is selected as the key type
• Separate edge on
The outline width settings can be made independently for left, right, top, and
bottom sides. The separate edge function is only available when luminance
key, linear key, or chroma key is selected as the key type.
Knob
1
2
Parameter Adjustment
Width Width
Position Position
Density Density
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Density Density
Parameter Adjustment
Width Outline width
Density Outline density
Parameter Adjustment
Top Top edge width
Left Left edge width
Setting values
0 to 8
359 to 0
0 to 100
Setting values
0 to 100
0 to 100
359 to 0
0 to 100
Setting values
0 to 8
(0 to 100)
0 to 100
Setting values
0 to 8
0 to 8
Key Setting Operations With the Key Control Block
a)
a)
b)
a)
a)
255