Key Adjustment Operations With the
Multifunction Flexi Pad Control Block
This section describes basic key adjustment operations when using the
Multifunction Flexi Pad control block.
EDIT ENBL button
Notes
To select [M/E 4], a previous assignment in the Setup menu is required. For
details, see "Assigning a Button for M/E-4 Selection in the Setup Menu" (page
542).
Selecting the switcher bank and keyer
Before carrying out key adjustment, first select the key adjust mode, then select
the switcher bank and keyer.
For example, to adjust key 1 on M/E-1, proceed as follows.
Mode selection buttons
Region selection buttons
Memory recall section
Key Adjustment Operations With the Multifunction Flexi Pad Control Block
Alphanumeric display
Adjustment knob displays
Adjustment knobs
263