Sony MVS-8000X User Manual page 268

Multi-format production switcher processor with ccp-8000 series center control panel volume 1

Hide thumbs Also See for MVS-8000X:

Table of Contents

[DROP BDR] button: Applies a drop border to the edge.

[SHDW] button: Applies a shadow to the edge.

For parameters that can be adjusted with the adjustment knobs, see "Key Edge

Modifications" (page 232).

Setting the degree of edge softening

[SOFT EDGE] button: Softens the key edge.

For parameters that can be adjusted with the adjustment knobs, see step 7 in

"Key Edge Modifications" (page 235).

Enabling the set key to be used on the AUX bus

[PROC KEY] button: This enables the keyer key fill/key source signal to be

For details, see "Using an external processed key" (page 260).

Sending a signal subjected to key processing to frame memory

[FM FEED] button: Press this to assign the key fill/key source signal

For details, see "Using a frame memory feed" (page 261).

Using a DME currently used on another keyer

[OVER RIDE] button: When one DME channel is in use, holding down this

Recalling the keyer using the DME channel

[TRCE] button: Holding down this button, press the selection button for the

Monitoring DME output

[DME MON] button: Holding down this button and pressing the selection

Key Adjustment Operations With the Multifunction Flexi Pad Control Block

subjected to key processing, then used as a reentry signal by selection on

the AUX bus.

processed on the currently selected keyer to frame memory source 1 or 2.

button and pressing a DME channel button ([DME1] to [DME8]) allows

you to forcibly select this channel. The button for the selected DME

channel lights green.

DME channel already assigned to another keyer or transition, to switch the

keyer or transition to which the DME channel is assigned to the currently

selected state.

button for a DME channel ([DME1] to [DME8]) allows you to monitor the

signal for this channel as a reentry signal to DME MON V/K.