Sony MVS-8000X User Manual page 220

5
220
Key Setting Operations Using Menus
• When a color vector key is selected
Knob Parameter Adjustment
1 Y Clip Reference level for creating
luminance signal
2 Y Gain Luminance signal sensitivity
3 C Clip Reference level for creating
chrominance signal
4 C Gain Chrominance signal sensitivity
5 Density Key density
Knob Parameter Adjustment
1 Y Filter Luminance signal filter coefficient 1 to 9
2 C Filter Chrominance signal filter
coefficient
• When a wipe pattern key or key wipe pattern key is selected
Knob Parameter Adjustment
1 Size Pattern size
2 Soft Degree of edge softness
3 Density Key density
Make the following settings as required.
To invert the black and white sense of the key source: Press [Key
Invert], turning it on.
To adjust the horizontal position or key source width for a luminance
key, linear key, or chroma key: Press [Key Position], turning it on,
and set the parameters.
Knob Parameter Adjustment
1 H Phase Key horizontal position
2 Left Key left edge position
3 Right Key right edge position
To set the key priority: Press [Key Priority] or select VF7 'Misc' and
HF3 'Key Priority' to access the Key Priority menu.
For details, see "Setting the Key Priority by a Menu Operation" (page
166).
Parameter group [1/2]
Parameter group [2/2]
Setting values
+109.59 to –7.31
–100.00 to +100.00
100.00 to 0.00
–100.00 to +100.00
0.00 to 100.00
Setting values
1 to 9
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Setting values
–4.00 to +4.00
–4.00 to +4.00
–4.00 to +4.00