Other Key Setting Operations - Sony MVS-8000X User Manual

3
4
You can check the DME operating status in the Status menu (see page 447).
Assigning the DME output signal to a monitor signal
1
2

Other Key Setting Operations

Using an external processed key
You can select and use the key processed keyer key fill and key source signals
on the AUX buses.
1
2
260
Key Setting Operations With the Key Control Block
To select the third channel video signal, when the selected DME is Ch3,
select the signal on the DME utility 1 bus. When the selected DME is Ch7,
select the signal on the DME utility 2 bus.
To select the fourth channel video signal, when the selected DME is Ch4,
select the signal on the DME utility 2 bus. When the selected DME is Ch8,
select the signal on the DME utility 1 bus.
For details of the method of signal selection, see "Bus Selection" (page
147).
Holding down the output destination specification button [MON] in the
key control block, use the DME channel selection buttons to select the
DME channel (DME1 to DME8) you want to use.
The selected DME output is assigned to DME MON V and DME MON K.
To check the DME assignment status, hold down just the [MON] button.
While it is held down, the lit color of the [DME1] to [DME8] buttons
shows the key assignment status.
Lit green: Shows the DME currently being monitored.
Lit amber: Shows a DME which can be monitored.
Off: DME is not assigned.
Select the keyer to be allocated.
In the key control block, press [PROC KEY], turning it on.
The button lights amber, and on the currently selected keyer, the key fill
and key source are assigned to reentry signals PROC V and PROC K.