Sequence 2 Setup - Agilent Technologies 8753ET User Manual

Sequence 2 Setup

The following sequence makes a series of measurements until all 26 CW measurements are made and the
loop counter value is equal to zero. This sequence includes:
• taking data
• incrementing the source frequencies
• decrementing the loop counter
• labeling the screen
1. Press the following keys on the analyzer to create sequence 2:
NOTE To enter the following sequence commands that require titling, an external keyboard may be
used for convenience.
Seq DONE SEQ MODIFY
Seq NEW SEQ/MODIFY SEQ
Taking Data
Seq SPECIAL FUNCTIONS
Sweep Setup
Incrementing the Source Frequencies
Display MORE
Input as title: FREQ:CW UP
DONE
Seq SPECIAL FUNCTIONS
TITLE TO PERIPHERAL
PERIPHERAL GPIB ADDR
Decrementing the Loop Counter
DECISION MAKING
SEQUENCE 2 SEQ2
Labeling the Screen
Display MORE
Input as title: MEASUREMENT COMPLETED
DONE
Seq DONE SEQ MODIFY
SEQUENCE 2 SEQ2
WAIT x
TRIGGER MENU MANUAL TRG ON POINT
TITLE ERASE TITLE
PERIPHERAL GPIB ADDR
21
DECR LOOP COUNTER
TITLE ERASE TITLE
x1
.1
x1 TITLE TO PERIPHERAL
IF LOOP COUNTER<>0
Making Mixer Measurements
Fixed IF Mixer Measurements
19 x1
2- 31