Creating Single Point Limits - Agilent Technologies 8753ET User Manual

Figure 1-63 Sloping Limit Lines

Creating Single Point Limits

In this example procedure, the following limits are set:
• from 23 dB to 28.5 dB at 141 MHz
• from 23 dB to 28.5 dB at 126.5 MHz
1. To access the limits menu and activate the limit lines, press:
LIMIT MENU
System
CLEAR LIST YES
2. To designate a single point limit line, as shown in
• downward pointing, indicating the upper test limit
• upward pointing, indicating the lower test limit
Press:
ADD STIMULUS VALUE
UPPER LIMIT
LIMIT TYPE SINGLE POINT
ADD STIMULUS VALUE
UPPER LIMIT
LOWER LIMIT
LIMIT TYPE SINGLE POINT
LIMIT LINE
141
M/
23
x1 LOWER LIMIT
RETURN
126.5 M/

23
x1
28.5
x1 DONE
RETURN
Using Limit Lines to Test a Device
LIMIT LINE ON
Figure 1-64, you must define two pointers:

28.5
x1 DONE



Making Measurements
EDIT LIMIT LINE

1- 79