Ascii Data Formats - Agilent Technologies 8753ET User Manual

If you select
DATA ARRAY ON
stored to disk in IEEE-64 bit real format (for LIF disks), and 32 bit PC format for DOS disks. This makes
the DOS data files half the size of the LIF files.
NOTE
Selecting
See "ASCII Data Formats" on page
❏
GRAPHICS ON
If you select
GRAPHICS ON
for information on using display graphics.) The measurement display is not saved with this selection.
(Refer to "If You Are Plotting Measurement Results to a Disk Drive" on page 4-11
measurement displays to disk.)
❏
DATA ONLY ON
If
DATA ONLY ON
is not saved, and therefore, cannot be recalled.
6. Choose the type of format you want:
❏ Choose
SAVE USING BINARY
❏ Choose
SAVE USING ASCII
the information into a spread sheet using comma-separated values (CSV) format.
7. Press
RETURN SAVE STATE

ASCII Data Formats

CITIfile
CITIfile (Common Instrumentation Transfer and Interchange file) is an ASCII data format that is useful when
exchanging data between different computers and instruments. CITIfiles are always saved when the ASCII
format has been selected as shown:
Save/Recall
DEFINE DISK-SAVE
Select one of the following choices:
—
DATA ARRAY ON
—
DATA ONLY ON
—
RAW ARRAY ON
—
FORMAT ARY ON
SAVE USING ASCII
RETURN
SAVE STATE
If
DATA ARRAY ON
,
RAW ARRAY ON
may also store data to disk in the S2P ASCII data format.
DATA ARRAY ON
, the user graphics area is saved. (Refer to the programmer's guide
data array is saved along with any other selected array, the instrument state
for all applications except CITIfile, S2P, or CAE applications.
for CITIfile, S2P, and CAE applications or when you want to import
.
, or
DATA ONLY ON
Printing, Plotting, and Saving Measurement Results
, or
FORMAT ARY ON
4-39.
, or
FORMAT ARY ON
Saving Measurement Results
, the data is
to plot
is selected, a CITIfile is saved
4- 39