Safety and Regulatory Information
Safety Considerations
Servicing
WARNING
No operator serviceable parts inside. Refer servicing to qualified personnel. To prevent
electrical shock, do not remove covers.
WARNING
These servicing instructions are for use by qualified personnel only. To avoid electrical
shock, do not perform any servicing unless you are qualified to do so.
WARNING
The opening of covers or removal of parts is likely to expose dangerous voltages.
Disconnect the instrument from all voltage sources while it is being opened.
WARNING
Adjustments described in this document may be performed with power supplied to the
product while protective covers are removed. Energy available at many points may, if
contacted, result in personal injury.
WARNING
The power cord is connected to internal capacitors that may remain live for 10 seconds
after disconnecting the plug from its power supply.
WARNING
For continued protection against fire hazard replace line fuse only with same type and
rating (115V operation: T 5A 125 V UL/CSA; 230V operation: T 4A H 250V IEC). The use of
other fuses or material is prohibited.
8-6