Making Measurements
Using Markers
analyzer calculates the statistics for the entire trace.
1. Move marker 1 to any point that you want to reference:
• Turn the front panel knob.
OR
• Enter the frequency value on the numeric keypad.
2. Press
Marker
MODE MENU
3. Press
MARKER 2
marker 1.
4. Press
Marker Fctn
standard deviation, and peak-to-peak values of the section of the measurement data between the active
marker and the delta reference marker.
An application for this feature is to find the peak-to-peak value of passband ripple without searching
separately for the maximum and minimum values.
If you are viewing a measurement in the polar or Smith Chart format, the analyzer calculates the
statistics using the first value of the complex pair (magnitude, real part, resistance, or conductance).
Figure 1-32 Example Statistics of Measurement Data
1-42
REF=1
and move marker 2 to any position that you want to measure in reference to
MKR MODE MENU
to make marker 1 a reference marker.
to calculate and view the mean,
MKR STATS ON