8. To position the marker on the reflection of interest, press:
and turn the front panel knob, or enter a value from the front panel keypad.
Marker
In this example, the velocity factor was set to one-half the actual value, so the marker reads the time and
distance to the reflection.
9. To position a marker at each reflection of interest, as shown in
MARKER 2
MARKER 3
front panel keypad after each key press.
Figure 3-9
Device Response in the Time Domain
Making Reflection Response Measurements
, turning the front panel knob or entering a value from the
MARKER 4
Making Time Domain Measurements
Figure
3-9, press:
3- 11