Choosing Scale - Agilent Technologies 8753ET User Manual

(see Figure 4-6), followed by
— Select
LINE TYPE MEMORY
line type (see Figure
Table 4-4 Default Line Types for Plot Elements
Plot Elements Channel 1 Line Type Numbers
Data Trace
Memory Trace
Figure 4-6 Line Types Available
NOTE
You must define the line types for each measurement channel (channel 1/3 and channel
2/4).

Choosing Scale

• Press
SCALE PLOT
❏ Choose
SCALE PLOT [FULL]
space for all display annotations such as marker values and stimulus values. The entire analyzer
display fits within the defined boundaries of P1 and P2 on the plotter, while maintaining the exact
same aspect ratio as the display.
❏ Choose
SCALE PLOT [GRAT]
defined P1 and P2 scaling point on the plotter. (Intended for plotting on preprinted rectangular or
polar forms.)
.
x1
to modify the line type for the memory trace. Then enter the new
4-6), followed by .
x1
7
7
until the selection appears that you want.
if you want the normal scale selection for plotting. This includes
if you want the outer limits of the graticule to correspond to the
Printing, Plotting, and Saving Measurement Results
Channel 2 Line Type Numbers
7
7
Defining a Plot Function
4- 15