Purging A Sequence From Disk; Printing A Sequence; In-Depth Sequencing Information - Agilent Technologies 8753ET User Manual

Making Measurements
Using Test Sequencing
1. To view the first six sequences on the disk, press:
Seq MORE LOAD SEQ FROM DISK
• If the desired sequence is not among the first six files, press:
READ SEQ FILE TITLS
2. Press the softkey next to the title of the desired sequence. The disk access light should illuminate briefly.
NOTE If you know the title of the desired sequence, you can title the sequence (1–6) with the
name, and load the sequence. This is also how you can control the sequence number of an
imported titled sequence.

Purging a Sequence from Disk

1. To view the contents of the disk (six titles at a time), press:
Seq MORE STORE SEQ TO DISK
READ SEQ FILE TITLS
• If the desired sequence is not among the first six files, press:
READ SEQ FILE TITLS
2. Press the softkey next to the title of the desired sequence. The disk access light should illuminate briefly.

Printing a Sequence

1. Configure a compatible printer to the analyzer. (Refer to the "Options and Accessories" chapter of the
reference guide.)
2. To print a sequence, press:
Seq MORE PRINT SEQUENCE
NOTE If the sequence is on a disk, load the sequence (as described in a previous procedure) and
then follow the printing sequence.

In-Depth Sequencing Information

Features That Operate Differently When Executed in a Sequence
The analyzer does not allow you to use the following keys in a sequence:
and keys
key, and
Preset
(backspace key)
1-106
READ SEQ FILE TITLS
until the desired file name appears.
PURGE SEQUENCES
until the desired file name appears.
and the softkey for the desired sequence.