Agilent Technologies 8753ET User Manual page 65

Hide thumbs Also See for 8753ET:

Table of Contents

Figure 1-41 Duplexer Measurement

Normally, a 2-port calibration requires a forward and reverse sweep to complete before the displayed trace

updates. For faster tuning, it is possible to set the number of sweeps for the active display channel (S

for channel 1 in this case) to update more often than the inactive display channel. In this example we

choose 8 updates of the forward parameters to 1 update of the reverse in channel 1, and 8 updates of the

reverse to 1 update of the forward in channel 2 (where the active parameters are S

System CONFIGURE MENU

System CONFIGURE MENU

Characterizing a Duplexer (ES Analyzers Only)

TESTSET SW CONTINUOUS

Making Measurements