Defining a Plot Function
1. Press
DEFINE PLOT
Copy
Choosing Display Elements
• Choose which of the following measurement display elements that you want to appear on your plot:
❏ Choose
PLOT DATA ON
❏ Choose
PLOT MEM ON
❏ Choose
PLOT GRAT ON
❏ Choose
PLOT TEXT ON
not include the marker values or softkey labels.)
❏ Choose
PLOT MKR ON
plot.
Figure 4-5 Plot Components Available through Definition
Selecting Auto-Feed
• Press
AUTO-FEED
❏ Choose
AUTO-FEED ON
printer after each time you press
❏ Choose
AUTO-FEED OFF
NOTE
The peripheral ignores
.
if you want the measurement data trace to appear on your plot.
if you want the displayed memory trace to appear on your plot.
if you want the graticule and the reference line to appear on your plot.
if you want all of the displayed text to appear on your plot. (This does
if you want the displayed markers, and marker values, to appear on your
until the correct choice is highlighted.
if you want a "page eject" sent to the plotter or HPGL compatible
.
PLOT
if you want multiple plots on the same sheet of paper.
AUTO-FEED ON
Printing, Plotting, and Saving Measurement Results
when you are plotting to a quadrant.
Defining a Plot Function
4- 13