To Plot Multiple Measurements On A Full Page - Agilent Technologies 8753ET User Manual

To Plot Multiple Measurements on a Full Page

You may want to plot various files to the same page, for example, to show measurement data traces for
different input settings, or parameters, on the same graticule.
1. Define the plot, as explained in
2. Press
Copy PLOT
for the displayed directory. For example, the analyzer would assign PLOT00FP if there were no previous
plot files on the disk.
3. Press
Save/Recall
4. Press
FILE UTILITIES
the A character.
5. Press
SELECT LETTER
6. Define the next measurement plot that you will be saving to disk.
For example, you may want only the data trace to appear on the second plot for measurement
comparison. In this case, you would press
PLOT DATA ON
PLOT MKR OFF
7. Press
Copy PLOT
8. Press
Save/Recall
9. Press
FILE UTILITIES
the B character.
10. Press
SELECT LETTER
11. Continue defining plots and renaming the saved file until you have saved all the data that you want to put
on the same page. Renaming the files as shown allows you to use the provided program, that organizes
and plots the files, according to the file naming convention.
"Defining a Plot Function" on page
. The analyzer assigns the first available default filename
DEFINE PRINT
and turn the front panel knob to highlight the name of the file that you just saved.
RENAME FILE
.
DONE
Copy
PLOT MEM OFF PLOT GRAT OFF
.
. The analyzer will assign PLOT00FP because you renamed the last file saved.
and turn the front panel knob to highlight the name of the file that you just saved.
RENAME FILE
.
DONE
Plot File
First File Saved
Second File Saved
Third File Saved
Fourth File Saved
Printing, Plotting, and Saving Measurement Results
Plotting Multiple Measurements Per Page from Disk
4-13.
and turn the front panel knob to place the pointer to
DEFINE PLOT
PLOT TEXT OFF
and turn the front panel knob to place the pointer to
Recognized Filename
PLOT00FPA
PLOT00FPB
PLOT00FPC
PLOT00FPD
and choose
4- 27