Configuring The Analyzer To Produce A Time Stamp; Aborting A Print Or Plot Process - Agilent Technologies 8753ET User Manual

Configuring the Analyzer to Produce a Time Stamp

You can set a clock, and then activate it, if you want the time and date to appear on your hardcopies.
1. Press
System SET CLOCK
2. Press
SET YEAR
3. Press
SET MONTH
4. Press and enter the current day of the month, followed by
SET DAY
5. Press
SET HOUR
6. Press
SET MINUTES
7. Press
ROUND SECONDS
8. Press
TIME STAMP

Aborting a Print or Plot Process

1. Press the key to stop all data transfer.
Local
2. If your peripheral is not responding, press
.
and enter the current year, followed by
and enter the current month of the year, followed
and enter the current hour of the day (0-23), followed by
and enter the next immediate minute, followed by
when the current time is exactly as you have set it.
until
TIME STAMP ON
Local
Printing, Plotting, and Saving Measurement Results
Configuring the Analyzer to Produce a Time Stamp
.
x1
appears on the softkey label.
again or reset the peripheral.
.
x1
.
x1
.
x1
.
x1
4- 31