Agilent Technologies 8753ET User Manual page 27

Figure 1-8 Example Dual Channel with Split Display On
3. To return to a single-graticule display, press:
NOTE You can control the stimulus functions of the two channels independent of each other by
pressing
Dual Channel Mode with Decoupled Stimulus
The stimulus functions of the two channels can be controlled independently using
COUPLED CH ON off
for each channel using
MARKERS: UNCOUPLED
key.
Marker Fctn
NOTE
ES models only: For dual channel, if channels are uncoupled and you have full 2-port
calibrations on both channels, you will not be able to select a non-ratioed measurement. For
example, you can measure S
NOTE Auxiliary channels 3 and 4 are permanently coupled by stimulus to primary channels 1 and 2,
respectively. Decoupling the primary channels' stimulus from each other does not affect the
stimulus coupling between the auxiliary channels and their primary channels.
SPLIT DISPLAY 1X
Sweep Setup COUPLED CH OFF
in the stimulus menu. In addition, the markers can be controlled independently
or B/R, but not input B.
21
Using Display Functions
.
.
in the marker mode menu, under the
Making Measurements
1- 13