Agilent Technologies 8753ET User Manual page 267

How the Analyzer Names These Files Sequentially
When text files are saved, the analyzer generates the file names automatically in the following format:
txtcss.csv
where: txt is a constant that indicates that this is a text file,
c is the indicator of the channel (14) on which the measurement data was taken.
ss is a 2-digit, sequential indicator of the measurement (file index number). The file index
number may be numbered from 0031. As the next measurement is taken, the file index
number is incremented.
If all four channels are making measurements and a save is performed, there will be four
channel numbers that share the same file index number. For example, the files would be
named txt100.csv, txt200.csv, txt300.csv, and txt400.csv. If a measurement does not include
all four channels, unused channel-file index numbers will not be used by the next
measurement. However, if all of the files that share a file index number are erased, that file
index number will be re-used.
csv is the file format, comma-separated value in this case.
Printing, Plotting, and Saving Measurement Results
Saving Measurement Results
4- 43